By Among all the roof styles, the built-in is undoubtedly one of the most sophisticated. With its modern style and full of character, the built-in roof is no longer a trend and has established itself as an architectural standard very dear to residents and designers. But do you know how to make a built-in roof? With this tip you can know all about roofer guide to roof repair and roofing.
If you still have some doubts, no problem. This article will show you exactly what this type of roofing is, its advantages, and, finally, teach how to make a built-in roof.
How To Make A Built- In The Roof For Your House
The construction of the built-in roof is simpler to be done than that of apparent roofs as it is not necessary to create all the extensive woodwork that goes under the tiles as support. It is still necessary to do this, but it is not necessary to spend as much wood.
First, it is necessary to define the height of the roof, which relates to the right foot of the structure. The built-in roof must be placed on top of the slab, which is located on top of the walls.
After extending the trusses on the structure to touch the two walls of the room, fasten them to the wall. After that, it is necessary to pass other rafters in the opposite direction, making a wooden weave.
Contrary to what many people think, the built-in roof has a small inclination typically directed to its center, and the wood is largely responsible for the flow of water to this part of the roof just look for the best roofing services to do the work.
The inclination can also be done pointing in any direction; the only mandatory requirement is installing gutters, which must also have an inclination tending to zero towards the nozzle.
Note that to give the effect of a built-in roof, you still need to lift a few more inches of bricks over the tiles so that they are properly hidden behind this “wall.” One of the significant disadvantages of the embedded roof is the heat generated by fiber-cement tiles, which do not have good thermal insulation as ceramic tiles. So, to solve this problem, install a thermal blanket on the slab.
The slab must be very well waterproofed, as the built-in roof does not leave much space for extensive maintenance on the electrical installation, generally located inside the slab. To avoid problems, short circuits, and accidents, make the waterproofing with professionals and quality material.
Comments